Paper and cardboard recycling
Paper is a commonly used and recycled material in large quantities. However, we must not underestimate its resistance to volume reduction. It is a highly abrasive material that requires the use of very powerful machines and tools made of highly wear-resistant materials.
Cardboard plants are extensions of paper processing plants. Certain parts of these plants are customised in order to increase the productivity and quality of the material they process.
Single-shaft shredder GRR280
The shredders in the GRR line are suitable for various materials in applications calling for lower throughputs. These shredders are equipped with a grid to allow uniform piece size at outfeed.
- Compact dimensions
- The bearings are amply separated from the shredding zone
- Parallel shaft gear reducer
Single-shaft shredder GSR480
GSR480 with 480 mm rotor is a single-shaft shredder with radial pusher and electric motor drive. These shredders are equipped with a grid to allow uniform piece size at outfeed.
- High shredding surface area
- Compact dimensions
- Bearings amply separated from the shredding zone
- Parallel shaft gear reducer
- Easy maintenance thanks to fully automatic opening of the compartment
- Screen maintenance
Single-shaft shredder GS650
GS650 with 650 mm rotor is a single-shaft shredder with radial pusher and electric motor drive able to guarantee high hourly throughput.
- Arc welded monobloc structure for elevated robustness
- Large shredding surface area and the maximum reliability
- Bearings separated from the shredding zone
- Parallel shaft gear reducer
- Easy maintenance thanks to fully automatic opening of the service compartment and the screen
Single-shaft shredder GS900
The high-powered GS900 shredder is a top-of-the range single-shaft machine with radial pusher, equipped with electric motor drive and able to guarantee high hourly throughput.
- Arc welded monobloc structure for elevated robustness
- Large shredding surface area
- Bearings amply separated from the shredding zone
- Parallel shaft gear reducer
- Easy maintenance thanks to fully automatic opening of the service compartment and the screen
Two-shaft shredder TR2A200
TR2A200 is the most compact shredder in the TR2A series.
Two-shaft shredders are designed for volumetric reduction and coarse shredding of the material.
The machine has electric motor drive with planetary gear reducers and can be equipped with an inverter on request.
- Shredding section in arc welded fabricated steel (15 mm gauge plates)
- Bearings amply separated from the shredding zone
- 2 hexagonal section 80 mm shafts
- Independently driven rotors
- Shafts C/C distance of 200 mm
Two-shaft shredder TR2A300
TR2A300 is a medium-small shredder.
Electric motor drive, with planetary gear reducers and an inverter on request.
- Shredding section in arc welded fabricated steel
- Bearings amply separated from the shredding zone
- 2 hexagonal section 130 mm shafts
- Independently driven rotors
- Remote connection for assistance
Two-shaft shredder TR2A400
TR2A400 is a shredder that can be supplied in an electric or hydraulic version.
The very low consumption of this machine saves energy, while the special steel blades allow very long life cycles.
- Fabricated arc welded steel shredding section (30 mm gauge plates)
- Bearings amply separated from the shredding zone
- Independently driven rotors
- 2 hexagonal section 210 mm shafts
- Independently driven rotors
- Remote connection for assistance
Two-shaft shredder TR2A450
TR2A450 is a shredder suitable for heavy duty work cycles.
The generously sized frame is designed to withstand bending-twisting moments, also when shredding extremely tough materials.
- Fabricated arc welded steel shredding section (30 mm gauge plate)
- Bearings amply separated from the shredding zone
- 2 hexagonal section 200 mm shafts
- Independently driven rotors
Two-shaft shredder TR2A520
TR2A520 is a top-of-the-range shredder suitable for heavy duty work cycles.
The generously sized frame is designed to withstand bending-twisting moments, also when shredding extremely tough materials, guaranteeing high performance levels.
- Bearings amply separated from the shredding zone
- 2 hexagonal section 240 mm shafts
- Independently driven rotors
Mobile Shredder DRM650
The DRM650 self-propelled shredder features a slow rotation double shaft and is crawler mounted, with hydraulic transmission.
- Arc welded monobloc structure composed of a cutting chamber
- Low speed rotation with high torque to the rotors
- Bearings amply separated from the shredding zone
- Cylindrical rollers with bolt-on cutter supports
- Cutting diameter of the cutters Ø650 mm
- Fixed blades in special hardened steel.
- Diesel engine and hydraulic transmission coupled directly to the engine
- Radio remote control for complete control of the machine